C|PS² - Compact system for particle suction extraction

This non-destructive, mobile test method with suction extraction enables the economical, faster and application-oriented particle extraction on large-area components or directly in the process enviroments.

The particles are suction-released from the surface and sucked in by using a suitable nozzle. The removed particles are collected in a laboratory bottle or an a particle trap.

For protection and overload protection, there is a filter unit in addition to the cyclone unit.

The absorbed particles can be further analyzed in combination with the filter unit.

Suctioning is possible with or without the cyclone unit.

A compact and combinable case system allows easy transportation of the particle suction extraction system and the equipment.

Technical Data

• Dimensions CPS² (L x W x H): 375 x 247,5 x 352 mm
• Weight: 9.5 kg
• Supply voltage: 230 V 50/60Hz
• With differential pressure display
• Max. volume flow: 30m³/h
• Max. vacuum: 240 mbar
• Power of mobile dust extractor: 650-2300 W
• Dimensions of mobile dust extractor (L x W x H): 470 x 320 x 495 mm

Scope of delivery

Case Basic equipment

• 1x Particle suction extraction system CPS²
• 1 x 0.5 m connection hose between the cyclone / filter unit
• 1 x 2 m suction hose, internal diameter 16 mm
• 1 x Bluetooth remote control for industrial vacuum cleaner
  
• 1 x measuring device for the vacuum measurement, Testo 526-1
• 2 x plugs for the cyclone unit and the filter unit
• 4 x plugs for the hose ends
• 1 x side cover of the cyclone unit
• 1 x flotation unit
• 1 x wash bottle
• 1 x protective cover
  

Case Analysis and extraction equipment

Drawer 1

• 1 x tweezers for handling of the filter membrane (Art. No. 61364)
• 1 PU (100 pieces) x filter membrane PET 5 µm for the filter unit (Art. No. 6002095)
• 2 x water resistant fiber pins
• 1 PU (20 pieces) x filter frame and archiving cards (Art. No. 61138)
• 1 x suction nozzle Ø 12 mm
• 1 x hand piece for plug-in brush (LxD) 100 x 35 mm
• 1 x plug-in brush (internal diameter 16 mm / brush length 20 mm)
• 1 x timer

Drawer 2

• 6 x laboratory bottles 100 ml (Art. No. 61574)
• 1 x particle trap adapter
  
• 1 x flat nozzle with brush on one side
  

Drawer 3

• 1 x cleaning wire
• 1 x cleaning tab
• 1 x grounding cable 2.4 m for push button adapter
• 2 x particle traps (Art.No. 30001)
  

Mobile dust extractor

• FESTOOL industrial vacuum cleaner CTL MIDI I CLEANTEC (Art. No. 6002973)
• Max. volume flow industrial vacuum cleaner: 3700 l/min
• Max. vacuum of industrial vacuum cleaner: 24000 Pa
• With adaptation options for the case system
• Suction hose depot with 3.5 m suction hose and 7.5 m power cable